top of page

Fix It Sticks The Works – How to Use Every Tool

  • Jul 26
  • 3 min read


The Tools Included in The Works




T-Handle


















What is it for?

The T-Handle is the foundation of the entire The Works system. Every bit and specialty tool is used with this handle.

Used to:

  • Tighten screws

  • Loosen screws

  • Drive all included bits

Why?

The T-shaped design provides more leverage and better control than a standard screwdriver, making it easier to work with both small and large fasteners.





All-In-One Torque Driver




Proper torque is one of the most important factors when mounting optics and assembling precision firearms.

Used to tighten:

  • Scope mounts

  • Scope rings

  • Chassis screws

  • Action screws

to the correct torque specification.

Why?

Too little torque

➡ Your scope can shift and lose zero.

Too much torque

➡ You risk damaging screws, rings, or even the scope itself.


Also Available with Individual Torque Limiters

If you consistently use the same torque setting, Individual Torque Limiters may be the ideal solution.

Each limiter is factory preset to a specific torque value (such as 15, 25, 45, or 65 in-lb), allowing you to tighten screws quickly and consistently without adjusting the torque driver every time.

Benefits:

  • Faster and more efficient than adjusting a torque driver.

  • Delivers the same precise torque every time.

  • Reduces the risk of over-tightening or under-tightening.

  • Ideal for shooters who repeatedly mount optics or service the same firearms.




Universal Choke Tube Wrench



A versatile choke wrench that fits most shotgun choke tubes.

Used to:

  • Change choke tubes

  • Remove seized choke tubes

  • Tighten choke tubes

Compatible with .410 through 10 Gauge.

Why?

The correct choke can significantly affect your shot pattern. Being able to quickly change choke tubes allows you to adapt to different hunting situations or shooting disciplines.




Castle Nut Wrench



A dedicated tool for AR-15 platforms.

Used when:

  • Replacing a buffer tube

  • Installing or changing a stock

  • Servicing an AR-15

Why?

Allows you to tighten or loosen the castle nut properly without damaging the firearm or the nut itself.




Bolt Carrier Group Scraper



A specialized carbon removal tool for AR-platform bolt carrier groups.

Removes:

  • Carbon buildup

  • Fouling

  • Burnt residue

Why?

Carbon accumulates quickly on the bolt carrier group. Regular cleaning improves reliability and makes maintenance much easier.




Bronze Scraper



A soft bronze cleaning tool.

Removes:

  • Carbon

  • Fouling

  • Burnt residue

Why?

Bronze is hard enough to remove stubborn fouling but soft enough not to scratch steel surfaces.




Steel Pick



A precision steel pick.

Perfect for reaching:

  • Small grooves

  • Tight corners

  • Around the extractor

  • Trigger components

Why?

Ideal for removing carbon and debris from places that brushes and patches cannot reach.




Nylon Cleaning Brush



A soft cleaning brush.

Used to remove:

  • Dust

  • Powder residue

  • Carbon

Why?

Cleans effectively without scratching blued finishes, coatings, or other firearm surfaces.




Brass Rod Set

















Brass cleaning rods for firearm maintenance.

Used to:

  • Extend your cleaning rod

  • Clean firearm barrels

  • Attach brushes and cleaning patches

  • Remove carbon and powder fouling

Why?

Brass is softer than steel, helping prevent damage to the bore during cleaning.




Plastic Pin Punch



A non-marring plastic punch.

Used when:

  • Removing pins

  • Disassembling firearms

Why?

Helps prevent scratches and damage to the firearm's finish.




Steel Pin Punch


















A hardened steel punch.

Designed for:

  • Tight pins

  • Stubborn pins

  • Applications requiring additional force

Why?

When a plastic punch isn't enough, the steel punch provides the strength needed to remove difficult pins safely.




Glock Front Sight Tool



A dedicated tool for Glock pistols.

Makes it easy to:

  • Replace the front sight

  • Tighten the front sight screw correctly

Why?

Provides a secure fit and makes front sight installation much easier than using improvised tools.




1911 Bushing Tool



Designed specifically for Colt 1911-style pistols.

Makes it easy to:

  • Disassemble the pistol

  • Reassemble the pistol

Why?

Reduces the risk of damaging the barrel bushing during field stripping.




A2 Front Sight Tool



Designed for AR-15 rifles with A2 front sights.

Used to:

  • Adjust the front sight elevation

Why?

Allows precise and safe front sight adjustments without damaging the sight post.




24 Precision Bits



The kit includes 24 precision bits, including:

  • Torx

  • Hex

  • Phillips

  • Flathead

Why?

Compatible with most firearm screws, scope mounts, optics, and accessories.




Magnetic Parts Pad















A compact magnetic parts holder.

Keeps track of:

  • Screws

  • Pins

  • Springs

  • Small components

Why?

Prevents small parts from getting lost while working at the range, in the field, or on your workbench.




Who Is The Works Designed For?

✅ Hunters

✅ PRS Shooters

✅ Long-Range Shooters

✅ Shotgun Shooters

✅ Gunsmiths

✅ Shooting Clubs

✅ Law Enforcement & Security Professionals




Final Thoughts

The Works is much more than a screwdriver kit. It combines precision tools, firearm maintenance equipment, and specialized gunsmithing tools in one compact, portable case.

Whether you're mounting a scope, changing choke tubes, cleaning an AR-15, adjusting a Glock, or performing routine maintenance on your hunting rifle, The Works gives you the right tool for the job.

It's one of the most complete and versatile firearm maintenance kits available today—trusted by hunters, competitive shooters, professional armorers, and gunsmiths around the world.

 
 
bottom of page